EzAuto Wrap

Essmo™ Rose Gold Chrome DS08 Heat Transfer Vinyl HTV

Material Specification:

  • PU Composition
  • Thickness:190 Microns / 7.5 Mils (Please make sure plotter is capable of cutting such thickness)
  • Heat pressure sensitive backing
  • Chrome Finish

Application Instruction (Home Iron)

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 10-15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  • let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

  • Cut in reverse
  • Weed excess material
  • Preheat all fabric prior to pressing for best results
  • Apply design at 305°F/150°C-160°C for 12-15 seconds
  • let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

  • 100% Cotton
  • Poly / Cotton Blends
  • 100% Polyester
  • Leather

Laundering:

  • Wait 24 hours before 1st wash
  • Machine wash warm or cold / mild detergent (Max 60°C)
  • Dry on normal dryer setting
  • Do not bleach or dry clean

Note: Material will be rolled for shipment. Due to the nature of the material, wrinkles might appear after unroll. In this case, peel off the transfer tape (clear film) and re-apply transfer tape onto the film with heavy flat item on top such as yellow page for 15 minutes, the film will be back to the flat shape.
Chrome Color will discolor if over stretch. 

Welcome

EzAuto Wrap specializes in exotic, high-end luxury vehicle wraps. We have devoted ourselves to give our customers the finest in quality, reasonable prices, quick shipping time, and guaranteed satisfaction.

Newsletter

We promise to only send you good things.