EzAuto Wrap

Essmo™ White Printable DD03 Heat Transfer Vinyl HTV

Material Specification:

  • PU Composition
  • Thickness: 210 Microns / 8.25 Mils (Please make sure plotter is capable of cutting such thickness)
  • Heat pressure sensitive backing
  • Gold Finish

Application Instruction (Home Iron)

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 10-15 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  • let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Application Instructions (Heat Press)

  • Cut in reverse
  • Weed excess material
  • Preheat all fabric prior to pressing for best results
  • Apply design at 305°F/150°C-160°C for 12-15 seconds
  • let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.

Applies to:

  • 100% Cotton
  • Poly / Cotton Blends
  • 100% Polyester
  • Leather

Laundering:

  • Wait 24 hours before 1st wash
  • Machine wash warm or cold / mild detergent (Max 60°C)
  • Dry on normal dryer setting
  • Do not bleach or dry clean

Note: ** To be able to print on this material you need a Solvent/ Eco-Solvent printer **

    Welcome

    EzAuto Wrap specializes in exotic, high-end luxury vehicle wraps. We have devoted ourselves to give our customers the finest in quality, reasonable prices, quick shipping time, and guaranteed satisfaction.

    Newsletter

    We promise to only send you good things.